Metal shutter repair in Saint-Cloud

Shutter stuck open or closed, silent motor, bent slats: our technicians set off from the 16th arrondissement of Paris, 24/7, to release the shutter and secure your premises in Saint-Cloud. Unjamming from €280 incl. VAT, price given before we start.

Drawing of a shopfront metal shutter: box opened on the shaft, springs and motor, curtain, side guides

Metal shutters in Saint-Cloud: 24/7 repairs and fitting on quote

La Clé du 16 repairs the metal shutters of shops in Saint-Cloud, 24/7: shutter stuck open or closed, failed motor, dented slats, seized shutter lock. We also fit new shutters, on a free quote. The fitting is guaranteed for 5 years.

Area
Saint-Cloud (92210)
Neighbourhoods
Centre – Village, Montretout – Coutureau, Coteaux – Bords de Seine, Fouilleuse – Val d’Or
Quote
Free, answered within 2 hours on average
Price
Unjamming from €280 incl. VAT. Parts and new shutters on quote
Guarantee
Fitting guaranteed for 5 years
Emergency
Repairs 24/7

Unjamming, repair, new shutters: what we do

Shops, garages, warehouses or car parks: we work on manual and motorised shutters, with solid slats, micro-perforated slats or grilles.

The full guide: metal shutters in Paris

  • 24/7 unjamming, from €280 incl. VAT

    Jammed lock, slats out of the guides, shutter off its axis: we release the shutter and secure the premises.

  • Motor, shaft, springs, slats: on quote

    We check the power supply and the controls, then repair or replace only the damaged part. The price is given beforehand.

  • Motorisation and emergency override

    Central or tubular motor on a manual shutter, key switch, remote control, crank winch for power cuts.

  • New shutter fitting, on quote

    Solid slats, micro-perforated slats or wavy tubes, made to measure. Measurements taken on site, free quote, fitting guaranteed for 5 years.

Faulty shutter: find the cause

Choose what you are seeing: the drawing shows the part involved, and we tell you what we do.

What are you seeing?

Drawing of a shopfront metal shutter: box opened on the shaft, springs and motor, curtain, side guides 6 1 2 3 4 5 7 8
Parts shown in the drawing
  1. Box
  2. Shaft and springs
  3. Motor
  4. Curtain
  5. Side guides
  6. Bottom slat and lock
  7. Controls
  8. Emergency override

Stuck closed, impossible to open

Likely cause
Motor or capacitor out of order, jammed bottom-slat lock, or a broken spring that makes the shutter too heavy.
What we do
We open it with the emergency override or by hand, then look for the fault: motor, springs or lock.
Price
Unjamming from €280 incl. VAT, price given before we start.

Stuck open, impossible to close

Likely cause
Silent motor, faulty controls or a curtain jammed in the box: the premises stay open.
What we do
We lower and lock the shutter to close the premises, day or night, then repair.
Price
Unjamming from €280 incl. VAT, price given before we start.

It comes down crooked or strains

Likely cause
A slat out of the guides, a guide bent by an impact, or a shaft out of line.
What we do
We bring the curtain back into line, straighten or replace the guide and reset the shaft.
Price
On quote, given before any work.

The motor growls or spins freely

Likely cause
Worn motor brake, tired or broken balance springs: the motor is carrying the weight of the curtain alone.
What we do
We check the springs and the shaft before the motor: replacing them is often enough to relieve a motor that is still good.
Price
On quote, given before any work.

A slat is dented or bent

Likely cause
A knock from a delivery trolley or a vehicle, an attempted break-in: the slat catches and ends up jamming the shutter.
What we do
We replace the affected slats in the same profile, usually without changing the whole curtain.
Price
On quote, given before any work.

The lock or the key is jammed

Likely cause
Seized bottom-slat lock, key broken in the cylinder, jammed side bolts.
What we do
This is our trade as locksmiths: we open it without damaging the shutter, then repair or replace the lock.
Price
Unjamming from €280 incl. VAT, price given before we start.

The remote or the key switch no longer responds

Likely cause
Battery, radio receiver, key switch or circuit breaker: the controls are more often at fault than the motor.
What we do
We test the power supply and the controls, open with the emergency override if needed, then replace the faulty part.
Price
On quote, given before any work.

From the first message to the fitting

At each step you know what happens and what you will pay.

  1. You send a photo
    The shutter from the front, then the box or the motor, with the address of the premises.
  2. We answer within 2 hours on average
    A first opinion on the fault or the model, and what to do next.
  3. You receive the quote
    Free, with the price including VAT. Nothing starts without your agreement.
  4. We fit or repair
    Fitting guaranteed for 5 years.

What our customers say

We work with the main home insurers.

  • Allianz
  • Crédit Agricole Assurances
  • Groupama
  • MACIF
  • AXA

Metal shutters in Saint-Cloud: your questions

Another question? Call us, even at night.

How much does a metal shutter repair cost in Saint-Cloud?

Unjamming a metal shutter starts at €280 incl. VAT. If a part has to be changed (motor, shaft, springs, slats), we give you the price before replacing it: nothing is done without your agreement.

How soon can you reach us in Saint-Cloud?

Our technicians set off from the 16th arrondissement of Paris. We give you an arrival time over the phone, depending on the time of day and the traffic.

Can a single slat be replaced?

Yes, in most cases: the damaged slat is removed from the side and replaced with one of the same profile. If that profile is no longer made, we suggest changing the lower part of the curtain.

Do you come out at night and at weekends in Saint-Cloud?

Yes, 24/7, public holidays included. Premises that no longer close must not stay open until morning: call us, the price is given before the technician sets off.

Do you fit new metal shutters in Saint-Cloud?

Yes, on quote: solid slats, micro-perforated slats or wavy-tube grilles, manual or motorised, made to measure. We take the measurements on site. The quote is free and the fitting is guaranteed for 5 years.