Roller shutters in Boulogne-Billancourt: fitting and repair

Jammed shutter, snapped strap, silent motor or shutters to fit: our technicians set off from the 16th arrondissement of Paris and work in Boulogne-Billancourt. Free quote, answered within 2 hours on average, fitting guaranteed for 5 years.

Drawing of a roller shutter: box opened on the roller tube and motor, slatted curtain, side guides

Roller shutters in Boulogne-Billancourt: fitting on quote and repairs

La Clé du 16 fits, motorises and repairs roller shutters in Boulogne-Billancourt: new made-to-measure shutters in aluminium or PVC, replacement of a strap, a slat or a motor, release of a jammed shutter. The quote is free and the price is given before any work.

Area
Boulogne-Billancourt (92100)
Neighbourhoods
Parchamp – Albert-Kahn, Silly – Gallieni, Billancourt – Rives de Seine, République – Point-du-Jour, Centre-ville, Les Princes – Marmottan
Quote
Free, answered within 2 hours on average
Price
On quote, given before any work
Guarantee
Fitting guaranteed for 5 years
Emergency
Shutter stuck open: we answer 24/7

Fitting, repair, motorisation: what we do

Flats, houses, offices: we work on manual and motorised shutters, in aluminium or PVC.

The full guide: roller shutters in Paris

  • Roller shutter fitting, on quote

    New shutters made to measure, manual or motorised. Measurements taken on site, free quote, fitting guaranteed for 5 years.

  • Repair

    Strap, crank, curtain fasteners, slats, stops, tube or motor: we replace the faulty part, not the whole shutter.

  • Motorisation

    A tubular motor housed in the existing tube, a wall switch or a remote control: your manual shutter becomes electric.

  • Emergency repairs

    Shutter stuck open or closed: we release it, secure the window, then repair. The price is given before we start.

Faulty shutter: find the cause

Choose what you are seeing: the drawing shows the part involved, and we tell you what we do.

What are you seeing?

Drawing of a roller shutter: box opened on the roller tube and motor, slatted curtain, side guides 1 2 3 4 5 6
Parts shown in the drawing
  1. Box
  2. Roller tube and motor
  3. Slatted curtain
  4. Side guides
  5. Controls
  6. Strap or crank

It will not go up

Likely cause
Motor or capacitor at the end of its life, curtain fasteners broken inside the box, or a strap turning freely.
What we do
We open the box, test the motor and the fasteners, then replace the faulty part. The shutter is refitted and adjusted.
Price
On a free quote, given before any work.

It will not come down

Likely cause
Curtain wound too far into the box, broken stops, a slat off its axis or a limit setting that has drifted.
What we do
We bring the curtain back out, replace the stops and set the limits. If the window is left open to the street, we secure it first.
Price
On a free quote, given before any work.

It goes up crooked or sticks

Likely cause
A slat out of its guide, a dirty or bent guide, a fastener broken on one side only.
What we do
We put the curtain back in its guides, clean or straighten them, and replace the damaged fastener or slat.
Price
On a free quote, given before any work.

The motor runs but the shutter does not move

Likely cause
Broken curtain fasteners or a worn drive wheel: the tube turns without taking the slats with it.
What we do
We replace the fasteners or the drive wheel, leaving the motor alone if it is sound.
Price
On a free quote, given before any work.

The strap or crank is broken

Likely cause
Frayed strap, a winder whose spring has gone, or a worn crank gear.
What we do
We replace the strap, the winder or the gear. It is also a good time to motorise the shutter.
Price
On a free quote, given before any work.

A slat is broken or cracked

Likely cause
Impact, frost or ageing PVC: a damaged slat catches in the guides and ends up jamming the shutter.
What we do
We replace the affected slats with slats of the same profile, or the whole curtain if the profile is no longer made.
Price
On a free quote, given before any work.

The controls no longer respond

Likely cause
Remote battery, faulty switch or radio receiver, tripped circuit breaker: the motor is often not to blame.
What we do
We test the power supply and the controls before touching the motor, then replace or reprogramme whatever needs it.
Price
On a free quote, given before any work.

From the first message to the fitting

At each step you know what happens and what you will pay.

  1. You send a photo
    The window and the existing shutter, with the address.
  2. We answer within 2 hours on average
    A first opinion on the fault or the model, and what to do next.
  3. You receive the quote
    Free, with the price including VAT. Nothing starts without your agreement.
  4. We fit or repair
    Fitting guaranteed for 5 years.

What our customers say

We work with the main home insurers.

  • Allianz
  • Crédit Agricole Assurances
  • Groupama
  • MACIF
  • AXA

Roller shutters in Boulogne-Billancourt: your questions

Another question? Call us, even at night.

How much does it cost to fit a roller shutter in Boulogne-Billancourt?

The price depends on the size of the window, the curtain (aluminium or PVC), the operation (manual, wired or radio) and the access. We do not publish a price per metre: after a photo or a visit, you receive a free, detailed quote, within 2 hours on average.

How long does a new shutter take?

A roller shutter is made to measure: the lead time depends on the model and is stated on the quote. A breakdown does not wait for manufacturing: we secure the window first.

Is the fitting guaranteed?

Yes: our fitting work is guaranteed for 5 years. Keep the invoice, which lists the equipment fitted.

My roller shutter is stuck: does it need replacing?

Rarely. Usually a single part is at fault: strap, curtain fasteners, motor, stop or slat. We start with a diagnosis and replace only what is damaged. The price is given beforehand.

Can an existing manual shutter be motorised?

In most cases, yes: the tubular motor sits inside the roller tube, in place of the crank gear or the strap winder. A power supply is needed near the box. A radio control avoids running a cable to a switch.